+- Rotorway Forums (https://rotorwayforums.com)
+-- Forum: Rotorway General (https://rotorwayforums.com/forum-1.html)
+--- Forum: Modifications & Recommendations (https://rotorwayforums.com/forum-14.html)
+--- Thread: Cyclic fork reversal (/thread-113.html)
Cyclic fork reversal - Lyle Swallows - 05-30-2026
Hi there, ROG is still down. but there were a handful a posts on there that mentioned flipping the cyclic fork/yokes to achieve the same Lateral control but with less overall (half) cyclic travel, this allowed for less interference with legs and the passenger cyclic with minimal additional force required. fore-aft control remains untouched.
my cyclic control tube is out and i am repainting it. this is something i was curious if anyone has this implemented on their ship or has anyone gotten annoyed with the lateral cyclic travel?
i'm inclined to keep it to print unless i am cramming the cyclic into my legs.
maybe i should just modify my flying and not slip as much or stick to traveling where my nose is haha.
RE: Cyclic fork reversal - Orv Neisingh - 05-30-2026
I have only had cyclic interference issues when I have been instruction a student and the center collective is installed. With the center collective removed there is plenty of room to move your right leg over to allow full cyclic travel in that direction.