02-23-2026, 06:45 AM
finished making my hub centering tool, i really like the print they include in the rotorway
![[Image: IMG-1345.jpg]](https://i.ibb.co/dwYn4P2T/IMG-1345.jpg)
manuals for this. using the shims that it was initially setup with which are two .020" shims and two white nylon bushes for each side i'm showing .008" off center. :/ i'm gonna play around with the assembly of it incase i put something not in its corresponding position, i do have a shim kit thankfully, but my friction is set at the higher end already of 12ft lbs so i cant add any more thickness or i will lower the friction.
i do have delrin bushes aswell to replace the nylon and see how that effects the stackup. just have to play with it but i feel .008" misalignment from the factory is alot. measured back and forth ALOT so i dont think my tool is assembled incorrectly. i'll play with it in the next couple weeks as i've got my wedding to go to and a fun honeymoon away from this Alaskan cold...
![[Image: IMG-1346.jpg]](https://i.ibb.co/gq6hd5Y/IMG-1346.jpg)
![[Image: IMG-1345.jpg]](https://i.ibb.co/Cst3302y/IMG-1345.jpg)
manuals for this. using the shims that it was initially setup with which are two .020" shims and two white nylon bushes for each side i'm showing .008" off center. :/ i'm gonna play around with the assembly of it incase i put something not in its corresponding position, i do have a shim kit thankfully, but my friction is set at the higher end already of 12ft lbs so i cant add any more thickness or i will lower the friction.
i do have delrin bushes aswell to replace the nylon and see how that effects the stackup. just have to play with it but i feel .008" misalignment from the factory is alot. measured back and forth ALOT so i dont think my tool is assembled incorrectly. i'll play with it in the next couple weeks as i've got my wedding to go to and a fun honeymoon away from this Alaskan cold...